Camera-based traffic sign recognition > Functions on Demand

Camera-based traffic sign recognition

Camera-based traffic sign recognition¹،² supports you in maintaining an overview of the jungle of traffic signs by displaying signs for, e.g., speed limits, no-overtaking areas and temporary speed limits.

Your transit time for Camera-based traffic sign recognition

For spontaneous

1 or 6

months

For planners

1 or 3

years

For the determined

Lifetime

unlimited

This is how the traffic sign recognition works

Camera-based traffic sign recognition supports you by displaying traffic signs for, e.g., speed limits, no-overtaking areas and temporary speed limits that are detected within the system boundaries and located within the detection range of the front camera. The traffic sign recognition information is automatically displayed in the display of the digital instrument cluster, or in the optional Audi virtual cockpit. If desired, a personalisable speed warning can be activated, which visually warns the driver when the currently permitted speed is exceeded. Camera-based traffic sign recognition is purely for informational purposes. Camera-based traffic sign recognition includes:

Detection and display of no-overtaking and speed limit signs, including temporary speed limits⁵
Detection of the start and end of motorways, major roads, towns and traffic-calmed areas and display of the corresponding speed limit
Situation-dependent display and evaluation in the event of wetness, daytime-dependent speed limits and road works and when driving with a trailer (only for factory-fitted trailer hitch)

Download the myAudi App and select your desired time for camera-based traffic sign recognition

Individual

Flexible term of use

Safe

Informed about speed limits, including those that depend on the time of day, in the wet or when driving with a trailer

Clear

Display is in the direct field of view

Booking conditions

The use of Camera based traffic sign recognition via Functions on Demand is possible in the following vehicles: Audi A3 (ab MJ 2021). You also will need:

a verified myAudi account as main or secondary user
Functions on Demand capability in the vehicle
a compatible iPhone or Android Smartphone⁶

The specified fuel consumption and emission data have been determined according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. On September 1st 2018, the New European Driving Cycle (NEDC) was replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp or www.audi.ie/ie/web/en/models/layer/wltp-lp/layer/nefz-wltp.html

We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).