Skip to Content

Design & Specifications

The Audi A3 Sportback, viewed from the front at an angle against a dark background.

Fuel consumption (combined): 6.2–4.4 l/100 km (preliminary); CO₂ emissions (combined): 140–117 g/km (preliminary); CO₂ emission class: E-D (preliminary).

Emotions on four wheels.

Athletic and striking on the outside, a high-quality, feel-good zone on the inside. In the Audi A3 Sportback* you are also digitally mobile and fully connected.

The Audi A3 Sportback, featuring an Audi exclusive custom paint finish in Shiraz Red Metallic, viewed from the front at an angle against a dark background.

More unmistakeable.

Lend your Audi A3 Sportback* even more personality – e.g. with the customised paint finish, Audi exclusive* in Shiraz red, metallic.

Discover Audi exclusive

Technology packages*.

Tech*

The package for relaxed journeys, with assist systems such as adaptive cruise control* and the reversing camera*.

Tech plus*

Additional assistance is provided by park assist plus* as well as side assist with exit warning and rear cross-traffic assist*, *.

Tech pro*

Audi technologies that leave virtually nothing to be desired, such as the 360° surround view cameras* and matrix LED headlights.

A side view of the cockpit, featuring the sports steering wheel, the curved panoramic display and the ambient lighting.

Learn more about Technology and Digitalisation.

Discover Technology & Digitalisation
Back to top

© 2026 AUDI Ireland. All rights reserved.

The specified fuel consumption and emission data have been determined according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. On September 1st 2018, the New European Driving Cycle (NEDC) was replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp or https://www.audi.ie/en/wltp-lp/

We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).

Loading..