Matrix-LED-Package > Functions on Demand > Audi Ireland

Matrix LED package

The matrix LED technology combines a camera system with LED light sources and precise optics for highly adaptive light distribution. If other vehicles are detected, the system selectively hides only the area of the detected vehicle, in the remaining segments, the high beam remains active.

Your transit times for Matrix LED package

For spontaneous

1 or 6

month

For planners

1 or 3

years

For the determined

Lifetime

unlimited
1 test month¹

6 month

1 year

3 years

lifetime
€1.23²

from €232.49²*

from €441.75²*

from €1209.00²*

from €2325.00²*
*
The prices displayed in myAudi at the time of purchase are legally binding. Prices may vary depending on the vehicle and equipment.
Check vehicle-specific availability
  • Audi Q8 e-tron/Audi e-tron
    Audi e-tron GT

This is how the Matrix LED package works

In addition to their high efficiency, LED headlights offer great advantages in terms of safety and comfort. With a colour temperature of approximately 5,500 Kelvin, their light is similar to daylight, so it hardly tires your eyes – especially in the dark and in bad weather conditions. In addition to the Matrix LED function, the headlights also have the following functions: daytime running light, dipped beam, high beam, position light, dynamic flashing light, all-weather light (to reduce glare in poor visibility), and automatic dynamic headlight range control. The marker light is available in conjunction with the optional Night Vision Assistant³. To mark detected pedestrians, individual LEDs flash three times in quick succession, clearly highlighting the pedestrian's surroundings. The dynamic flashing light is activated segment by segment at a rate of a few milliseconds and always runs to the outside in the turning direction when flashing.

Simply add Functions on Demand to configure your Audi and find out how well the LED matrix technology fits your needs.

Download the myAudi App now and select your desired time period for the Matrix LED package
Comfortable

Flexible booking on demand

Efficient

Quickly adapt your vehicle to new conditions

Secure

Better night vision by adapting the light to the road conditions and marking recognised pedestrians

Booking conditions

The use of Matrix LED technology via Functions on Demand is possible in the following vehicles:
/Audi e-tron Q8/Audi e-tron (from MY 2020) or an Audi e-tron GT (from MY 2022).

You also will need:

  • a verified myAudi account as main or secondary user
  • Functions on Demand capability in the vehicle
Legal notice
1
The function can be booked once for the vehicle.
2
All prices include VAT.
The prices displayed in the myAudi app are legally binding at the time of purchase.
3
Please note: the systems only work within system limits and support the driver. The driver remains responsible for the vehicle and for paying the necessary attention in road traffic.
Back to top

© 2023 AUDI Ireland. All rights reserved

The specified fuel consumption and emission data have been determined according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. On September 1st 2018, the New European Driving Cycle (NEDC) was replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp or https://www.audi.ie/ie/web/en/models/layer/wltp-lp/layer/nefz-wltp.html

We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).
VHost
www.audi.ie
Version
191.15.0
Build
20240430131933
Frontend
170.0.0
Rendertime
20240509020949
StaticVersion
191150
Activated Scopes
Context Scopes