Audi Approved Body & Paint Repairs
Audi Approved Body Repairers have been established to ensure that the repair of every damaged Audi is of the highest standard.
Most importantly, they are supported by Audi. This means access to the latest information and training plus the guarantee that, following completion, your 3 year paint warranty and 12 year anti-perforation warranty will be maintained.
An Audi Approved Body Repairer provides a complete repair service, with friendly professional staff catering for your needs from the moment of initial contact, right through to the return of your finished vehicle. For your added convenience, you will also be able to take advantage of a courtesy car, collection and delivery service or Audi hospitality while you wait.
Guarantee of Repair
Only an Audi Approved Body Repairer will provide you with the 3 year guarantee on your repair and preservation of your 12 year anti-perforation warranty. It’s our way of underlining the quality, craftsmanship and meticulous standards that will be used to repair your Audi. To you, it means total peace of mind. You can even transfer the remaining Guarantee of Repair should you decide to part with your car.
Investment for today, and tomorrow
Throughout the Audi Approved Body Repairer Network, investment is an ongoing process. It’s not just an investment in state-of-the-art equipment, there’s an investment in our staff, through comprehensive training programmes. Our technicians are therefore highly skilled and familiar with the latest Audi technical information.
Your Audi will benefit from up-to-the-minute equipment and repair techniques. From realignment to welding, refinishing to final preparation, you can rest assured that your Audi will be restored to the highest standard.
Repair: A commitment to quality
Throughout the repair process only original Audi Genuine Parts are used, thereby maintaining the safety and integrity of your Audi. We recommend you fit Audi Genuine Parts as they are the only parts built to the exact specifications of your car’s original components. In addition, all materials and water based paints used are solvent free to minimise impact on the environment.
All work will be performed by an Audi-trained technician, who can utilise factory support and make reference to workshop repair manuals to ensure procedures are adhered to. When ready for refinishing, your Audi will be thoroughly and skilfully prepared before the priming and repainting processes begin. The use of advanced paint systems allow for a high quality of finish to be achieved, while low brake drying ensures ultimate durability. Careful reassembly of your vehicle takes place prior to extensive quality checks and testing. Your Audi will then be cleaned and returned to you in pristine condition.
What to do in the event of an accident
Personalise your Audi with the complete range of Audi Genuine Accessories, Parts and Merchandise online at AudiShop.ie. Choose to collect at your local Audi dealer or get it delivered to your door step for just €5 Nationwide Delivery.Find out more
The specified fuel consumption and emission data have been determined according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp.
We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).