Combined fuel consumption*: 8.0-7.8 l/100 km
Combined CO₂ emissions*: 208-203 g/km
The Audi S6 Saloon is a sporty all-rounder with a comprehensive range of in-series technologies in the areas of infotainment and driver assistance systems, a powerful drive system and a striking exterior.
The S diffuser and four chrome tailpipe trims are the distinguishing features of the rear of the Audi S6 Saloon¹.
The Audi S6 Saloon's 3.0 TDI engine (combined fuel consumption*: 6.3-6.2 l/100 km (37.3-37.9 mpg); combined CO₂ emissions*: 165-164 g/km (265-263 g/mi)) produces 257 kW (349 hp) of power.
The wide single-frame grill and distinctive side air intakes form the impressive front of the Audi S6 Saloon¹.
The standard exterior mirror housings have an aluminium aesthetic.
The Audi S6 Saloon¹ reflects the particularly sporty, distinctive and pioneering character of our current design language.
Many S-specific elements give the Audi S6 Saloon¹ a sporty character.
The S6 family consists of the Audi S6 Saloon¹ and the Audi S6 Avant (combined fuel consumption*: 6.5 l/100 km (36.2 mpg); combined CO₂ emissions*: 171 g/km (275.2 g/mi).
Sporty, functional, comfortable – the interior of the Audi S6 Saloon¹.
The optional Audi Connect Key is one of the services offered in our extensive Audi Connect range.
The infotainment offer
Important infotainment systems are directly in viewing and operating range. The standard Audi virtual cockpit, a fully digital instrument cluster with a 12.3-inch full-HD screen, is controlled by the multi-function steering wheel. You can use the VIEW button to choose between two modes, depending on your needs: a display with the instruments such as speedometer and tachometer in focus, and a display that shows graphical information such as navigation content.
In terms of entertainment, we offer the optional Bang & Olufsen Sound System in addition to the standard Audi sound system. The new 3D sound creates a surround-sound effect in the front seats.
0 to 100 km/h
The power of the Audi S6 Saloon is generated by a three-litre V6 TDI engine (combined fuel consumption*: 6.3-6.2 l/100 km; combined CO₂ emissions*: 165-164 g / km). Thanks to the engine's 349 hp and maximum torque of 700 Nm, you accelerate from 0 to 100 km/h in 5.0 seconds.
Sporty and comfortable –
The illuminated aluminium door panels with the S emblem accented by a rhombus give you a first taste when you open the driver and passenger door – the sporty design continues in the interior of the Audi S6 Saloon¹. The standard S sport seats with S emblem ensure that you are seated securely and provide numerous electrical adjustment options. The selector lever in the centre console also has the S emblem. You also have additional customisation options thanks to the range of optional leather packages and decorative inlays.
All passengers – including those in the back – enjoy a good amount of headroom and legroom. The optional air quality package with ioniser and aroma unit provides even more comfort. The optional panoramic glass roof lets in more light and can provide ventilation.
The front of the Audi S6 Saloon¹ stands out with its sporty elements: the wide, flat single-frame grill with the S6 badge in the radiator grille, the striking side air intakes and progressive lighting design.
The specified fuel consumption and emission data have been determined according to the measurement procedures prescribed by law. Since 1st September 2017, certain new vehicles are already being type-approved according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP), a more realistic test procedure for measuring fuel consumption and CO2 emissions. Starting on September 1st 2018, the New European Driving Cycle (NEDC) will be replaced by the WLTP in stages. Owing to the more realistic test conditions, the fuel consumption and CO2 emissions measured according to the WLTP will, in many cases, be higher than those measured according to the NEDC. Therefore, the usage of CO2 emission values measured according to WLTP for vehicle taxation from 1st September 2018 on can cause changes in this regard as well. For further information on the differences between the WLTP and NEDC, please visit www.audi.de/wltp.
We are currently still required by law to state the NEDC figures. In the case of new vehicles which have been type-approved according to the WLTP, the NEDC figures are derived from the WLTP data. It is possible to specify the WLTP figures voluntarily in addition until such times as this is required by law. In cases where the NEDC figures are specified as value ranges, these do not refer to a particular individual vehicle and do not constitute part of the sales offering. They are intended exclusively as a means of comparison between different vehicle types. Additional equipment and accessories (e.g. add-on parts, different tyre formats, etc.) may change the relevant vehicle parameters, such as weight, rolling resistance and aerodynamics, and, in conjunction with weather and traffic conditions and individual driving style, may affect fuel consumption, electrical power consumption, CO2 emissions and the performance figures for the vehicle. Further information on official fuel consumption figures and the official specific CO₂ emissions of new passenger cars can be found in the guide “Information on the fuel consumption, CO₂ emissions and electricity consumption of new cars”, which is available free of charge at all sales dealerships and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Strasse 1, 73760 Ostfildern-Scharnhausen, Germany (www.dat.de).